MicroMo's drive electronics are specifically designed to work with MicroMo's line of DC Motors, Brushless DC Motors, Miniature Stepper Motors, and Micro Drive product lines. MicroMo offers linear controllers, 2/4 Quadrant motion controllers, Synchronous drive motion controllers, and voltage and current mode drives.
MicroMo offers the following drive electronics products:
MicroMo Electronics' linear controllers [PDF] and motion controllers are optimized to drive MicroMo's DC Motors with precious metal or copper graphite commutation systems. They allow for speed, torque and position control as well as numerous other parameters in many different areas of applications. For programming, a large variety of ASCII commands is available as well as comfortable programs running under Windows 95/98/NT.
MicroMo recommends the MCDC 3003/3006 S for use with our line of DC motors. In conjunction with our IE2-512 encoders, the MCDC 3003/3006 S is capable of achieving a positioning resolution of 0.18°. A special ballast circuit protects the electronics from over-voltage during braking in generator mode. The MDCD 3003/3006 S motion controller is a 4-Quadrant PWM with RS232 interface. Please see the data sheet for further information.
MicroMo’s motion controllers are designed for use with MicroMo's three-phase brushless DC Servomotors allowing for speed and torque control. For programming, a large variety of ASCII commands are available as well as comfortable programs running under Windows 95/98/NT.
MicroMo recommends the MCBL 3003/3006 S for use with our line of Brushless DC Servomotors with linear hall sensors. Ultra-low speeds and high positioning resolutions (1/3000 revolutions) are thus possible without the need for an additional encoder. The motors have a sinusoidal current, resulting in a constant torque over the entire circumference. This means that the motors run particularly quietly, and efficiency is also increased. The MDBL 3003/3006 S motion controller is a 4-Quadrant PWM with RS232 interface. Please see Motion Controller 4-Quadrant PWM with RS232 interface data sheet [PDF] for further information.
MicroMo recommends the BLD 2401-SH2P for use with our Series 0620 Brushless DC Servomotor [PDF]. The BLD 2401-SH2P is a 2-Quadrant PWM Servo Amplifier suitable for speed control. The phase commutation sequence of the brushless DC Servomotor is automatically made by the Servo Amplifier. A specially designed frequency-to-voltage converter allows for precise speed regulation (regulator type P, proportional). Please see the data sheet for further information.
MicroMo’s motion controllers are designed for use with MicroMo's miniature 2-phase stepper motors allowing for speed and torque control. Voltage and current mode drivers are available.
MicroMo's motion controller for Micro Drives is a Synchronous Drive Servo Amplifier for use with the Series 0206...B Brushless DC Motor, Series 0308...B Sensorless Brushless DC Motor, and the Series 1202...B Flat Brushless DC Motor. It is super compact measuring 10.2mm x 10.2mm x 3mm. It can operate in 2 or 4 quadrant mode allowing for precise velocity and torque control.
User Manuals
The technical library contains manuals for controllers and amplifiers.
[User Manuals]
Software Downloads
Supporting software for controllers makes setup and programming easy.
[Download Software]
Electronic Accessories
Electronic accessories make connection easy and reliable.
[Data Sheets]
